EDGE SEALER CAST VINYL WRAP TAPE STRIPES | 3M | GLOSS | 8518

Clear Edge Sealer / 3M Gloss Cast Film Stripes

                             

Prevent edge lift!

Edge sealer 8518 is a clear glossy tape used to seal vehicle wraps, window graphics and for sealing cut edges and seams on watercraft wraps & graphics applications.

Edge sealing minimizes the adverse effects of rigorous use or prolonged or severe exposure conditions by providing  water and contaminant-tight seal between the film and substrate.

This product also may be applied even after the applied film shows signs of wear, such as edge lifting, to significantly reduce further wear.

Prepare the Graphic for Edge Sealing

1. Do not apply edge sealer unless the temperature is above the minimum recommended temperature.

2. Remove any application tape and re-squeegee the edges before applying the edge sealer.

3. Make sure all edges to be sealed are clean, dry, and free of contaminants.

Applying Edge Sealing Tape 8518

Never allow film or overlaminate to touch the rubber window molding.

If you have any questions, or if you need assistance, please do not hesitate to contact our customer service department:

Toll Free: 1.866.258.6908